How to solve the problem of no water output during the operation of the floor scrubber-SPARK

E-mail : info@sparktechclean.com

Info Center

How to solve the problem of no water output during the operation of the floor scrubber May 25, 2026

With the gradual increase in labor costs, the promotion of cleaning equipment has led to the increasing prevalence of mechanization over manual labor. Industrial floor scrubbers have gradually become the entry-level cleaning equipment, and their use in people's daily lives has become quite common. In many cases, we need to use battery-powered floor scrubbers.

Now the problem arises. As time goes by and the application frequency increases, even the best machinery and equipment will inevitably encounter difficulties. At this point, it is necessary for the application department or the users to know where the problem with the floor cleaning vehicle lies, what the cause might be, and this can also help to "prescribe the right medicine" for the problem.
When using an industrial floor cleaning machine for cleaning, one of the common problems encountered is that the machine stops supplying water suddenly during the cleaning process. How to solve this? Let's have the editor and you discuss it together:

1.The water volume in the clean water tank is insufficient.

During operation, when cleaning the floor without allowing the water to drain, first check the clean water tank. If there is no water flowing out, it might be that the tank is out of water. Just add more clean water.

2. The water flow adjustment switch has not been turned on.

If the freshwater tank is full, and no water is being discharged, you must check the water flow adjustment switch to see if the switch for allowing water to enter the cleaning equipment is open. If it is in the closed position, start the machine immediately.

3. Test the filter.

If neither of the above two possibilities exists, then there is only one possibility. Most floor scrubbers have a water filter screen. The reason why a general floor scrubber does not drain water is basically because the water filter screen is clogged. There are also dirt particles in the water, so remove the water filter screen, clean it thoroughly, and then reinstall it.

There have been some issues with the floor cleaning process. When the operators are using it, they should pay more attention. This way, when they communicate with the maintenance personnel, they can also help the maintenance staff quickly identify the problem and then carry out the repair.